User Manual

11
The height between the floor and the indoor antenna can vary. Follow the steps
below to install the indoor antenna.
1. Connect the indoor antenna to the booster using the coaxial cable included
in the kit
Note: Push the cable firmly into the jack on both the antenna and the booster,
then turn the connector sleeve clockwise until the connectors are tight
2. Move the indoor antenna around to compare the final values from the
antenna test results in Part A – the values roughly the same with the
indoor antenna connected
Note: If the values decreased, there may be some oscillation issues with the set
up – below are some ways to reduce oscillation:
• Increase the distance in-between the outdoor and indoor antennas
• Ensure that the indoor and outdoor antennas are not facing each other
• Use metal barriers between the indoor and outdoor antennas