User's Manual

_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL [phone] [phone] FAX [phone]
Web page, E-mail - www.hidcorp.com - ProxPro Plus Wiegand Reader Installation Manual 6030-900 REV G 7 of 10
Glass Mount Installation
Parts List
1) ProxPro Plus Reader, Side Cable Exit qty 1 ea. (included)
2) This Installation Manual qty 1 ea. (included)
3) Adhesive Foam Tape qty 3 ft (included)
4) 5 conductor Alpha 1295 C or equivalent. See cable notes. User supplied
As required, up to 500’
5) Power Supply Requirements User supplied
Linear, 10-28.5VDC, 120mA
"
Replace cover of reader ensuring that the LED is lined up with the LED lens on the cover.
"
Apply labels such that when the reader is mounted they are right side up.
"
Apply double sided tape to the tape track on either the front or the back, depending on which side of the
glass you are mounting, and secure to glass.
FIGURE 3