User Manual

Installation Guide
iCLASS™ Reader Models R10, R30, R40, RW300, RW400
An ASSA ABLOY Group company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL [phone] [phone] FAX [phone]
Web page - www.hidcorp.com e-mail – [e-mail]
iClass
™ Reader Installation Manual 6090-900 Rev 8 Page
2
of
3
3- Preparing/Mounting
Install Mounting Plate to wall surface or back box, then reassemble reader (reverse Step 1 procedure).
Dimensions are in inches (centimeters).
R10 Mounting Plate R30/RW300 Mounting Plate R40/RW400 Mounting Plate
4- Connecting 5- Testing
Yellow *Speaker
Blue *Hold
•
Turn Power On
- watch the sign-on LED and hear the
speaker tones sequence.
Violet ***Open Collector
White Data 1
•
Use a Test Card
- watch for the LED flash and hear the
Speaker tone for each card read.
Green Data 0
Orange *Green LED
6- Optional Features
Brown *Red LED
Red +DC (10-16 VDC)
•
RS232 interface/Host Mode -
for applications requiring a
serial link. See Protocol Document 6090-902 for information
Black Ground
Gray ***RX (Serial Receive)
•
Open Collector Output –
controls an external device
(13.8VDC Max) operating in Host Mode only. See
iCLASS
Application Note for details
Red/Green ***DSR (Not Used)
Pink ***TX (Serial Transmit)
•
Configuration Options -
Configure LED, Speaker, and other
features. See How To Order Guide or
iCLASS
Application
Note for details