FARGO® DTC®ii Plus User Guide PLT-05151, A.0.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide Copyright © 2020 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Trademarks HID GLOBAL, HID, the HID Brick logo, DTC, FARGO and iCLASS are trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission.
Section 01 Specifications Powering Trusted Identities
Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.1 Introduction The purpose of this section is to provide you with specific information on the Regulatory Compliances, Agency Listings, Technical Specifications and Functional Specifications for the DTC®ii Plus card printer. 1.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.2.2 United States This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.3 Safety messages 1.3.1 Safety messages - United States Symbol Critical instructions for safety purposes Danger: Failure to follow these guidelines results in personal injury or death. To prevent personalinjury or death: ◼ Reference the following safety messages before performing an operation. ESD: ◼ Always remove the power cord prior to performing repair procedures, unless otherwise specified.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.3.2 Safety messages - French Symbole Instructions critiques visant la Sécurité Danger: Si ces directives ne sont pas suivies les résultats peuvent être des lésions corporelles ou la mort. Pour éviter des lésions corporelles ou la mort: ◼ Rapportez-vous aux avis suivants de sécurité avant de procéder à une opération. ESD: ◼ Retirez toujours le câble d’alimentation avant d’effectuer des procédures de réparation, sauf spécification contraire.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.4 Technical specifications Term Function Print Method Dye Sublimation / Resin Thermal Transfer Print resolution 300 dpi (11.8 dots/mm); continuous tone Colors Up to 16.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide Term Function Output Hopper Card Capacity 100 cards (.030”/.762.mm) Reject Hopper Card Capacity 100 cards (.030”/.762.mm) Card Cleaning Card cleaning roller integrated into the ribbon cartridge. A new cleaning roller is included with each ribbon cartridge.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide = Dye-Sublimation Magenta Panel = Dye-Sublimation Cyan Panel = Resin Black Panel (Premium unless otherwise stated) = Clear Protective Overlay Panel = Fluorescing Panel PLT-05151, A.0.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.6.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.7 Printer components: blank cards Type Description Card Size The card printer accepts standard CR-80 sized cards. Card Surface Suitable cards must have a polished PVC surface free of fingerprints, dust or any other types of embedded contaminants. In addition, cards must have a completely smooth, level surface in order for the printer to achieve consistent color coverage.
Powering Trusted Identities FARGO® DTC®ii Plus User Guide Revision history Date Description Revision August 2020 Initial release. A.0.R PLT-05151, A.0.
Powering Trusted Identities PLT-05151, A.0.R Americas & Corporate 611 Center Ridge Drive Austin,TX 78758 USA Asia Pacific 19/F 625 King's Road North Point Island East Hong Kong Europe, Middle East & Africa 3 Cae Gwyrdd Green Meadow Springs Cardiff, CF15 7AB United Kingdom Brazil Condomínio Business Center Av. Ermano Marchetti, 1435 Galpão A2 - CEP05038-001 Lapa - São Paulo / SP, Brazil Support: Support: 852-3160-9833 Support: +44 (0) 2920 528 500 Phone: +55 115514-7100 hidglobal.
