User's Manual

Page 3-2 Printing Preferences
PLT-02496, Version: 1.0 November 2015
Field Definition
Card Size
Select the appropriate card option:
• CR-79: 3.313 x 2.063 inch (84.14 x 52.39 mm).
• CR-80: 3.452 x 2.204 inch (87.7 x 56 mm).
Inches/mm: Card sizes will display in inches or mm, depending on the option
selected.
Print Width & Print Length: The dimensions of the total print area for each card size.
Note: These print area dimensions are .04 in (1 mm) larger than the actual card size.
This allows the printer to overprint images to ensure they will appear edge-to-edge
when transferred to the card.
When designing a card format, always set the card size within the card design
program to the exact print length and width dimensions of the card.
Card Thickness (mil): Select the card thickness from the pull-down list.
Options are 10, 20, 30 (default), and 40 mil.
Orientation
There are two selections for card printing orientation.
• Portrait prints card vertically.
• Landscape prints card horizontally.
Copies Select the number of copies to print using Test Print.
Card Hopper
Selection
First Available: Selects the first available hopper (default).
Top: Selects the top hopper.
Bottom: Selects the bottom hopper.
Diagnostics
This will launch the Workbench program, which is included on the driver CD.
Also see the Workbench user guide located on the driver CD.
ToolBox See Chapter 4: ToolBox.
Test Print Sends one or more self-test prints to the printer.
About
This opens a dialog box containing the copyright information, the driver’s version
number and date code.