User's Manual

Page 3-4 Printing Preferences
PLT-02496, Version: 1.0 November 2015
Options
Note: The availability of options below is based on the Ribbon Type selected.
Rotate Front 180 Degrees: Adjusts the orientation of the first page of the card design to
accommodate the location of a chip or RFID sensor.
Rotate Back 180 Degrees: Adjusts the orientation of the second page of the card design to
accommodate the location of a chip or RFID sensor.
Disable Printing: Disables printing.
Write Only: For rewritable cards. The default setup is for the printer to first erase the entire
card and then write new information on the card. There is no option to select specific areas to
erase. However, to print or erase a section, use the Overlay/Print Area tab. Select the specific
area in the same manner as a print job with a color ribbon.
To erase many cards, use the FARGO Workbench Re-Writable Card Eraser option. It does not
print. It only erases.
Note: No ribbon is used with rewritable cards. Do not load a ribbon into the printer when using
this process. Printing on a rewritable card with a ribbon will damage the card.
Invert F-panel Image: Creates a negative of the fluorescent image. Used with Fluorescent
Panel Ribbon Type.
Encrypt Job Data: Encrypts information about the print job for enhanced security.
Field Definition