User's Manual
Table Of Contents
- DTC5500LMX Card Printer User Guide
- 1 - Specifications
- 2 - Setup and Installation Procedures
- 3 - Printing Preferences
- 4 - ToolBox
- 5 - Troubleshooting
- 6 - Firmware Upgrades
- 7 - Technical Support
Page 3-8 Printing Preferences
PLT-02496, Version: 1.0 November 2015
3.4 Image Calibrate Tab
Use the Image Calibrate tab to control the position of the printable area in relation to the card.
Group or Field Description
Image Position
Use the Image Position controls to position the image on a card.
Adjust the image position values by clicking on the Vertical and Horizontal
adjustment arrows.
The image position will flip and rotate according to the selection of portrait,
landscape, or rotate 180 degrees on previous screens