User's Manual

November 2015 PLT-02496, Version: 1.0
Printing Preferences Page 3-17
3.7 Overlay/Print Area Tab
Use the Overlay / Print Area tab to control and customize where the Overlay (O) panel and/or the
print area appear on the card. By default, this option is set to print and overlay the entire card.
The orientation of the card display area is determined by the orientation specified in your template.
For additional information, see Appendix A.
Field Description
Front/Back Specify the side of the card to apply the area definition.
Overlay/Print Area
Define the Overlay or Print Area.
Full Card: Select this option to overlay and/or print the entire card.
Defined Area(s): Select this option to overlay and/or print only in the selected and
defined area(s).
Undefined Area(s): Select this option to overlay and/or print in the space outside the
selected and defined area.
Omit Smart Chip Area: Select this option to overlay and/or print only in the space
outside the standard location of a smart chip.
Omit Mag Strip Area: Select this option to overlay and/or print only in the space
outside the standard location of an ISO-standard magnetic stripe.
Omit Signature Area: Select this option to overlay and/or print only in the space
outside the standard location of a signature panel.