User's Manual

Page 3-18 Printing Preferences
PLT-02496, Version: 1.0 November 2015
3.7.1 Define a Print Area
1. Select Front or Back.
2. Select an Overlay/Print Area from the drop-
down list.
When an option is selected, a default blacked
area appears on the card design area grid.
3. Click and drag to enlarge or move the area to the
preferred location on the card. The size and
coordinates of the area update with the changes.
Note: To delete the area, click Delete.
4. When complete, click OK.
Overlay/Print Area
(continued)
For Print and Overlay: This option applies the defined area to both the print and
overlay processes.
For Overlay Only: The defined are applies only to the overlay process. The entire
card prints and only the overlay is affected.
For Print Only (No Overlay): The defined are applies only to the print process.
Overlay is disabled.
Security Options
Visual Security Solutions: Enables a visual security option. The options are only
available for the Front side of a card. The default value for all cards is No Visual
Security.
This field presents options based on the orientation of the card in the template.
Landscape designs offer:
A – Upper Left
B – Upper Right
C – Lower Left
D – Lower Right
Portrait designs offer:
E – Upper Left
F – Upper Right
G – Lower Left
H – Lower Right
Verimark: This option is reserved for future use.
HoloMark: Use this option for hologram security.
Note: When an option is selected, the Overlay/Print Area is disabled and the
Security Options become selectable.
Field Description