Datasheet

ManualsBrandsHID Identity Manualsaccess control readers1336NGSSN

125 kHz Proximity

Physical Access

How to Order Guide

D00530, Release B.7

February 2012

The most current version of this document is always available for download at:

www.hidglobal.com/documents/125khz_htog_en.pdf.

To check status on your order, go to:

www.hidglobal.com > Knowledge Center > Customer Support > Customer Order Status

For Contact cards, 3

Party Contact-Chips and embeddable cards with or without contact chip,

see the

Logical Access How to Order Guide.

For Embedded products, see the

Embedded How to Order Guide.

HID, HID Global, ProxCard, DuoProx, ProxKey, ISOProx, ProxPass, eProx, MicroProx, Flexpass, FlexKey, ProxPoint, MiniProx,

ProxPro, ThinLine, MaxiProx, EntryProx, Prox80, FlexPass, and Corporate 1000 are the trademarks or registered trademarks of

HID Global Corporation, or its licensors, in the U.S. and other countries.

This document is subject to change without notice.

Document History

Date

Author

Description

Version

02/28/12

Modified Document History for B.5 revision

B.7

02/21/12

Corrected FPTAG Ordering Guide

B.6

02/01/12

Removed all instances of MultiProx

B.5

12/05/11

- Removed FPSMT and FPMXI content

- Added FPWGD Slot Punch Note

- Added FPTAG

- Modified Indala Reader /L cable option

- Added Keypad Option 23

B.4

08/18/10

Added ProxKey III to replace existing ProxKey II page

B.3

Summary of content (44 pages)

PAGE 1
25 kHz Proximity Physical Access How to Order Guide D00530, Release B.7 February 2012 The most current version of this document is always available for download at: www.hidglobal.com/documents/125khz_htog_en.pdf. To check status on your order, go to: www.hidglobal.com > Knowledge Center > Customer Support > Customer Order Status. For Contact cards, 3rd Party Contact-Chips and embeddable cards with or without contact chip, see the Logical Access How to Order Guide.
PAGE 2
125 kHz How to Order Guide - D00530, B.7 Contents Credentials .................................................................................................................................................... 3 Overview ...................................................................................................................................................................3 ® 1326 - ProxCard II Card Ordering Form ....................................................................................
PAGE 3
125 kHz How to Order Guide - D00530, B.7 Credentials Overview Each part number consists of a base number, to indicate the type of Credential, and a number or letter to indicate each Credential option. Each Credential has a standard part number which includes default options, as indicated on the attached Credential guides. When an order is placed for a credential, the base number and all options must be specified.
PAGE 4
125 kHz How to Order Guide - D00530, B.7 1326 - ProxCard® II Card Ordering Form Ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 1326 Base Model Programming (Check One) L - Programmed, Low Frequency (125 kHz) HID. Specify Programming Information. C - Programmed, Low Frequency (125 kHz) Casi Rusco4. (Identified on Ink jet Markings) Specify Programming Information. N - Non-Programmed, Low Frequency (125 kHz). Programming Information Not Required.
PAGE 5
125 kHz How to Order Guide - D00530, B.7 1336 / 1536 - DuoProx® II Card Ordering Form Ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 1336 Standard PVC 1536 Composite 40% Polyester / PVC * Programming (Check One) L - Programmed, Low Frequency (125 kHz). Specify Programming Information. C - Programmed, Low Frequency (125 kHz) Casi Rusco6. (Identified on Ink jet Markings) Specify Programming Information.
PAGE 6
125 kHz How to Order Guide - D00530, B.7 1346 - ProxKey® III Keyfob Ordering Form Ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 1346 Base Model Programming (Check One) L - Programmed, Low Frequency (125 kHz). Specify Programming Information. N - Non-Programmed, Low Frequency (125 kHz). Programming Information Not Required. Front Packaging .24 in [6 mm] N – ProxKey III - Black with grey insert.
PAGE 7
125 kHz How to Order Guide - D00530, B.7 1386 / 1586 - ISOProx® II Card Ordering Form Ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 1386 Standard PVC 1586 Composite 40% Polyester / PVC * Programming (Check One) L - Programmed, Low Frequency (125 kHz). Specify Programming Information. C - Programmed, Low Frequency (125 kHz) Casi Rusco6. (Identified on Ink jet Markings) Specify Programming Information.
PAGE 8
125 kHz How to Order Guide - D00530, B.7 1351 - ProxPass® II Vehicle Identification Tag Ordering Form Ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 1351 Base Model Programming L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
PAGE 9
125 kHz How to Order Guide - D00530, B.7 1391 - MicroProx® Tag Proximity Ordering Form Ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 1391 Base Model Programming (Check One) L - Programmed, Low Frequency (125 kHz). Specify Programming Information. C - Programmed, Low Frequency (125 kHz) Casi Rusco6. (Identified on Ink jet Markings) Specify Programming Information. N - Non-Programmed, Low Frequency (125 kHz).
PAGE 10
125 kHz How to Order Guide - D00530, B.7 168/169 Style - ProxCard® Plus Card Ordering Form Instructions 1. Select one option from each category (1-5) and mark the appropriate box. 2. Complete the Programming Information and Company Information Sections. 3. Fax the completed Ordering Guide to HID’s North Haven, CT, office at 1-203-407-5967, Attn.: Customer Service. 4.
PAGE 11
125 kHz How to Order Guide - D00530, B.7 Direct Image PVC Glossy Label Part Numbers Part # Description Thickness Dimensions 1324GAV11 1324GAN11 ProxCard II size with slot punch, white adhesive back ProxCard II size, no slot punch, white adhesive back 10 mil PVC 10 mil PVC 3.310” x 2.060" 3.310” x 2.060" 1324GAV21 1324GAN21 ProxCard II size with slot punch, white adhesive back ProxCard II size, no slot punch, white adhesive back 20 mil PVC 20 mil PVC 3.310” x 2.060" 3.310” x 2.
PAGE 12
5 kHz How to Order Guide - D00530, B.7 Custom Artwork Checklist Form Company Name: PO No. Quantity: Card/Tag and Artwork File No. Date Minimum order quantity for Custom Artwork is 500 cards per order. Some Custom Artworks may be higher. This form, accompanied with the “Custom Artwork placement and Inkjet Location Form” MUST be filled out, SIGNED and returned to HID so that your order can be processed.
PAGE 13
125 kHz How to Order Guide - D00530, B.7 Indala 125kHz Credential Every part number consists of a base model number to indicate the type of product, and a letter or number to indicate ® each product option. Each Indala product has a standard part number that includes default options, as indicated on the order guide. When an order is placed for a product, the base model number and all options must be specified.
PAGE 14
125 kHz How to Order Guide - D00530, B.7 FPISO - FlexPass Imageable Card Ordering Guide Standard Part No.
PAGE 15
125 kHz How to Order Guide - D00530, B.7 FPSMT - Flexpass™ Imageable Card with Contact Chip Ordering Guide NOTE – All contact chip cards are available in the Logical Access How to Order Guide. February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved.
PAGE 16
125 kHz How to Order Guide - D00530, B.7 FPCRD - FlexCard Standard Card Ordering Guide Standard Part No.: Description: FPCRD-SSSMW-0000 125 kHz, printed Indala logo on front, embossed Indala logo on back, card marking on flat side (lower right corner with slot to the right), white color (not printable), no artwork. Vertical slot punch only.
PAGE 17
125 kHz How to Order Guide - D00530, B.7 FPTAG - FlexTag® Ordering Guide Standard Part No.: FPTAG-SSSS-XXXX Description: 125 kHz, printed Indala logo on front side FPTAG S S S S XXXX BASE NUMBER PROGRAMMING FRONT GRAPHICS BACK GRAPHICS MARKING POSITION CUSTOM FILE NO BASE NUMBER FPTAG - 125 kHz Keytag Type Proximity Card PROGRAMMING S = Standard Programmed, Low Frequency 125 kHz – exact coding standard, with no gaps or over-runs.
PAGE 18
125 kHz How to Order Guide - D00530, B.7 FPKEY - FlexKey® Keytag Ordering Guide Standard Part No.
PAGE 19
125 kHz How to Order Guide - D00530, B.7 CXKEY - CX Keytag Ordering Guide Standard Part No.: Description: CXKEY-SSSS-0000 125 kHz, printed Indala logo on front side, printed strip for marking on back side. CXKEY S S S S 0000 BASE NUMBER PROGRAMMING FRONT GRAPHICS BACK GRAPHICS MARKING POSITION CUSTOM FILE NO. BASE NUMBER CXKEY Keytag style proximity card PROGRAMMING S = Standard Programmed, Low Frequency 125 kHz – CASI-RUSCO 12-digit format with no external marking number.
PAGE 20
125 kHz How to Order Guide - D00530, B.7 FPMXI - Flexpass™ Proximity Multiple Technology Imageable Card Ordering Guide NOTE – MIFARE Prox Combination cards are available in the 13.56 MHz HTOG. Program the standard MIFARE/Prox card as Indala Prox to provide full backwards compatibility. Page 20 of 44 © 2007 – 2012 HID Global Corporation. All rights reserved.
PAGE 21
125 kHz How to Order Guide - D00530, B.7 FlexPass Formats The following formats are non-proprietary and are available to all customers. Please call HID to discuss other formats.
PAGE 22
125 kHz How to Order Guide - D00530, B.7 Electronic Artwork Requirement Checklist File Submission & Preparation This document gives digital artwork specifications from our press department. Use these guidelines and your project should go smoothly through the pre-press department. MEDIA: Please submit files via E-Mail or on CD. Compressed files should be self extracting. Submitted media will not be returned o the customer. FTP site available upon request.
PAGE 23
125 kHz How to Order Guide - D00530, B.7 Anti-Counterfeiting Descriptions Printing Types 1) Laminated Lithographic Printing: High resolution (>3600 dpi) offset printing technology yields photographic quality images. Laminated printing places the ink layer under a rigid clear plastic overlay which protects the printed image from abrasion and allows you to re-print over the existing artwork on the card.
PAGE 24
125 kHz How to Order Guide - D00530, B.7 Custom Artwork Placement and Inkjet Location Form ProxCard® II Cards Company Name: Quantity: Card and Artwork File No. PO No. Date 1. External Number: Standard Location: The standard external # location is shown on the template below. The external # can only be printed on the back of the card. The external # will be printed in the standard location, unless otherwise specified.
PAGE 25
125 kHz How to Order Guide - D00530, B.7 ® DuoProx II Cards Company Name: Quantity: Card and Artwork File No. PO No. Date 1. External Number: Standard Location: The standard external # location is shown on the template below. The external # can only be printed on the back of the card. The external # will be printed in the standard location, unless otherwise specified. Custom Location: Please indicate the desired external # location by writing "12345" on the appropriate template.
PAGE 26
125 kHz How to Order Guide - D00530, B.7 ISOProx® II Cards Company Name: Quantity: Card and Artwork File No. PO No. Date 1. External Number: Standard Location: The standard external # location is shown on the template below. The external # can only be printed on the back of the card. The external # will be printed in the standard location, unless otherwise specified. Custom Location: Please indicate the desired external # location by writing "12345" on the appropriate template.
PAGE 27
125 kHz How to Order Guide - D00530, B.7 MicroProx Tag Company Name: Quantity: Tag and Artwork File No. PO No. Date 1. External Number: Standard Location: The external # can only be printed on the back of the Tag. 2. Artwork Placement: Please indicate the placement of your artwork on the template below (Front side only). Custom artwork must clear the inner circle by a min. of 0.125". MicroProx Tag Artwork Template Front Notes: 1. Minimum order quantity 10,000 pieces per Purchase Order. 2.
PAGE 28
125 kHz How to Order Guide - D00530, B.7 1050AGN00 ProxProgrammer® Ordering Guide The HID ProxProgrammer is now located in the Credential Programmer How To Order Guide. Page 28 of 44 © 2007 – 2012 HID Global Corporation. All rights reserved.
PAGE 29
125 kHz How to Order Guide - D00530, B.7 HID Proximity Readers Accessories Part No. Description ProxPro Family 5455AGM00 5350-113-01 5350-113-02 5350-113-03 5350-113-04 5355A-302-01 5355A-302-02 5355A-302-03 5355A-302-04 5350-101-01 5350-101-02 5355A-306-01 5355A-306-02 5355A-306-03 5355A-306-04 5355A-306-05 5355A-306-06 5355A-306-07 5355A-306-08 5455-311-01 5455-311-02 5455-311-03 5455-311-04 30-0003-01 137-0005-11 Glass Mount Kit, ProxPro and ProxPro II Readers Bezel, ProxPro Reader with Keypad (Rev.
PAGE 30
125 kHz How to Order Guide - D00530, B.7 Part No. Description MaxiProx 5370A-305-01 5375-303-01 5375-313-01 56-0002-01 Cover, MaxiProx Reader (Rev. A) - Gray Accessory Kit, MaxiProx Reader (Old wiring Diagram) (Rev. A) Accessory Kit, MaxiProx Reader (New wiring Diagram) (Rev. A) MaxiProx Reader Rubber Gasket (Rev. A) ProxPoint Plus 6005-111-01 6005-111-02 6005-111-03 6005-111-04 New Look 3 6005-312-01 6005-312-02 6005-312-04 6005-312-05 Classic cover, ProxPoint Plus Reader (Rev.
PAGE 31
125 kHz How to Order Guide - D00530, B.7 6005 / 6008 - ProxPoint® Plus Proximity Reader Part Numbers and Options Card Reader Description ProxPoint Plus Proximity Reader with Wiegand output with Clock and Data output Base Part No. Current Rev. No.* 6005 6008 Color Options G = Classic Charcoal Gray B = Classic Beige W = Classic White K = Classic Black 1 = Designer Black 2 = Designer Charcoal Gray 4 = Designer Wave Blue 5 = Designer White B B Hardware Options B = Pigtail (18 inches/45.
PAGE 32
125 kHz How to Order Guide - D00530, B.7 5365 / 5368 - MiniProx® Proximity Reader Part Numbers and Options Card Reader Description MiniProx Proximity Reader with Wiegand output with Clock and Data output Base Part No. Current Rev. No.* 5365 5368 Color Options G = Classic Charcoal Gray B = Classic Beige W = Classic White K = Classic Black 1 = Designer Black 2 = Designer Charcoal Gray 4 = Designer Wave Blue 5 = Designer White E E Hardware Options P = Pigtail (18 inches/45.
PAGE 33
125 kHz How to Order Guide - D00530, B.7 5455 / 5458 / 5355 / 5352 / 5358 - ProxPro® Family Proximity Reader Part Numbers and Options ProxPro® II Card Reader Description ProxPro® II Proximity Reader with Wiegand output with Clock & Data Output ProxPro® Card Reader Description ProxPro® Proximity Reader with Wiegand output with Clock & Data Output ProxPro® Proximity Reader with Serial output Base Part No. Current Rev. No.* G = Charcoal Gray B = Beige W = White K = Black 5455 5458 B Base Part No.
PAGE 34
125 kHz How to Order Guide - D00530, B.7 5395 / 5398 - ThinLine® II Proximity Reader Part Numbers and Options Card Reader Description Base Part No. ThinLine II Proximity Reader with Wiegand output with Clock and Data output Current Rev. No.* 5395 5398 Color Options G = Classic Charcoal Gray B = Classic Beige W = Classic White K = Classic Black 1 = Designer Black 2 = Designer Charcoal Gray 4 = Designer Wave Blue 5 = Designer White C Hardware Options 1 = Pigtail (18 inches/45.
PAGE 35
125 kHz How to Order Guide - D00530, B.7 5375 - MaxiProx® Proximity Reader Part Numbers and Options Card Reader Description MaxiProx® Proximity Reader Base Part No. Current Rev. No.* 5375 A Color Options G = Charcoal Gray Hardware Options N = None Configuration Setting Options¹ Custom² 00 XXXX Y *Revision numbers and availability are subject to change without notice. Notes: 1 Configuration Setting 00 = LED normally red, reader flashes green on tag reads.
PAGE 36
125 kHz How to Order Guide - D00530, B.7 4045 - EntryProx™ Proximity Reader Part Numbers and Options Base Part No. Current Rev. No.
PAGE 37
125 kHz How to Order Guide - D00530, B.7 5405 / 5408 - Prox80™ Proximity Reader Part Numbers and Options Card Reader Description Base Part No. Current Rev. No.* Prox80™ Proximity Reader1 with Wiegand output with Clock and Data output 5405 5408 Color Options W = White G = Gray A Hardware Options Configuration Setting Options2 00 01 02 03 L = Long Pigtail (9 feet/3 meters) 04 05 06 07 Custom3 XXXX Y *Revision numbers and availability are subject to change without notice.
PAGE 38
125 kHz How to Order Guide - D00530, B.7 Indala Proximity Readers Overview Every part number consists of a base model number to indicate the type of product, and a letter or number to indicate each product option. Each product has a standard part number that includes default options, as indicated on the order guide. When an order is placed for a product, the base model number and all options must be specified.
PAGE 39
125 kHz How to Order Guide - D00530, B.7 FP - FlexPass® Reader Ordering Guide FP 1 5 1 1 A /L BASE NUMBER STYLE READ RANGE TYPE COLOR OUTPUT FORMAT CABLE LENGTH BASE NUMBER FP = FlexPass (reader format required) STYLE 1 = Wave 2 = Curve 3 = Arch 4 = Linear 5 = Keypad 0 = Core Electronics Module READ RANGE 5 = 5 in. (13 cm.) – available in STYLES: Wave, Curve, Arch, Linear TYPES: Slim and Wall switch 2 = 12 in. (30 cm.) – available in STYLES: Wave, Arch TYPE: Midrange 0 = 4 in. (10 cm.
PAGE 40
125 kHz How to Order Guide - D00530, B.
PAGE 41
125 kHz How to Order Guide - D00530, B.
PAGE 42
125 kHz How to Order Guide - D00530, B.7 Corporate 1000™ Format - Request & Authorization Form Corporate 1000 is a 35-bit card format that is developed specifically for use by individual end-user organizations. Organizations must qualify, formally enroll and be accepted by HID Global Corporation. The Corporate 1000 Format is offered to large, multi-location, and end-user organizations which use HID access control readers and cards.
PAGE 43
125 kHz How to Order Guide - D00530, B.7 To ensure the security of your card format, authorize any HID System Provider to purchase and manage your Corporate 1000 cards on your behalf. Enter authorized HID System Provider information in Table II, and HID System Installers in Table III. Use this form to communicate all authorization concerning your Corporate 1000 format. It is recommended for each end-user to maintain an original copy of this form listing all authorizations.
PAGE 44
125 kHz How to Order Guide - D00530, B.7 Index of Terms for HID Credentials Card An HID Card is a credit card size piece of plastic that contains electronic circuitry that works with HID readers. The term “Card” is often loosely applied to Keyfobs and Tags as well. Keyfob A plastic device, roughly the size of a car key, that works like a Card. It is more rugged than a card and very convenient to carry on a key ring.