Datasheet

Using 13.56 MHz contactless smart card technology, the iCLASS

RK40 and RWK400 provide a

powerful solution. Combine a contactless card presentation with a personal identification number

(PIN) to support dual authentication of identity. Or, configure the panel for single-factor

authentication, using only a card or a PIN.

The PIN can be verified either at the access control panel or locally by the keypad reader.

When verified locally, the PIN must be programmed into the iCLASS card using the iCLASS Card

Programmer (CP400).

The RWK400 offers the same features as the RK40, with the extended ability to read/write user

data to HID iCLASS credentials. Read/write applications include the storage/retrieval of data such

as biometric templates, health records, time and attendance, and digital cash. The possibilities are

endless!

Featuring crisp architectural styling, the keypad reader and reader/writer have an elegantly curved

faceplate. The 12-position weatherproof keypad uses discrete switches to provide positive tactile

response, optionally reinforced by an audible tone. The keypad also features a waterproof silicone

rubber boot, vandal-resistant metal keycaps, and backlit numbering.

The readers are equipped with a Wiegand output that easily interfaces with most existing access

control panels. The RWK400 is equipped with bi-directional communications of RS232, RS485

(full-duplex), UART or USB to enable host controlled reader behavior. In addition, uni-directional

communication of RS232, RS485 (full-duplex) or UART is enabled when the reader is running its

own internal applications. In addition the RK40 can be configured to output data over Clock-and-

Data hardware interface.

The iCLASS RK40 and RWK400 are compatible with all iCLASS credentials. The units can read

or read/write to credentials compatible with several ISO standards (See back page for more

details).

13.56 MHz Contactless Smart Card Readers

with Keypad

Plug-n-Play with new and existing access

control systems

w Dual-Factor Authentication - Add secure PINs to

the already highly secured iCLASS

card and reader

authentication.

w Flexible Conﬁguration - Choose from a variety

of PIN pad outputs that allow for compatibility with

almost any panel.

w Backlit - Use lighted numbers to assist users during

operation in poorly lit areas.

ACCESS ﬂexibility.

iCLASS

RK40 and RWK400 Readers

13.56 MHz Contactless

PAGE 1
3.56 MHz Contactless iCLASS RK40 and RWK400 Readers ® 13.56 MHz Contactless Smart Card Readers with Keypad Plug-n-Play with new and existing access control systems w Dual-Factor Authentication - Add secure PINs to the already highly secured iCLASS® card and reader authentication. w Flexible Configuration - Choose from a variety of PIN pad outputs that allow for compatibility with almost any panel. w Backlit - Use lighted numbers to assist users during operation in poorly lit areas. ACCESS flexibility.
PAGE 2
Features Security 64-bit authentication keys are extremely secure. Readers and cards require matching keys to function. All RF data transmission between the card and reader is encrypted using a secure algorithm. The key management system reduces the risk of compromised data or duplicated cards. Elite Custom Keys Custom keys provide the highest level of security, where cards and readers are uniquely matched to individual sites or customers, and are non-interchangeable.