Installation Guide

11
5. Installations Instructions
Part List
A. Static Bracket (Available in various sizes depending on the nozzle used)
B. Base Unit
C. 2x M5 Screws
D. Backing plate set (2 pieces)
E. Front Cover
F. 4x M3 Screws
G. Top Cover (with magnet for activation)
H. 4x M3 Screws (short)
Instruction
Place the static bracket (A) on the nozzle, preferably as far back as possible while still allowing the
backing plate (D) to be fitted behind the static bracket. The static bracket has two screws which can be
removed to fit onto the nozzle spout.
Place the base unit (B) onto the fitted static bracket as well as the backing plate set (D). Use the M5
Screws (C) to fit the components together. Once the parts are fitted, place on the front cover (E) and fit
the M3 screws (F). Now place the top cover (G) on to the base and fit the remaining screws (H).