Use and Care Manual

Use and Care Manual

To apply this static cling window film successfully, please follow

tips below:

1. Keep the window and film extremely wet during installation process. If it

becomes dry, re-wet it completely before applying film.

2. When you squeegee out all bubbles, please use the cloth as a cushion between

the squeegee and the film to avoid making scratches.

3. Application is easier with two people, especially on larger windows (3-4 feet

wide).

4. Apply film to cool shaded windows when glass temperature is between 45-90℉.

For best results, do not apply in direct sunlight or freezing weather.

5. The best time for installing is early morning or evening when the glass is cooler.

6. Make your windows or glass doors extremely clean, make sure there's no glue

residue or dust.

7. Cut the film to a size of 2-3mm from the window frame, pick up a corner at the

edge, re-spray and paste, and scrape the bubble.

PAGE 1
Use and Care Manual To apply this static cling window film successfully, please follow tips below: 1. Keep the window and film extremely wet during installation process. If it becomes dry, re-wet it completely before applying film. 2. When you squeegee out all bubbles, please use the cloth as a cushion between the squeegee and the film to avoid making scratches. 3. Application is easier with two people, especially on larger windows (3-4 feet wide). 4.
PAGE 2
IMPORTANCE: 1. Do not apply any film to frosted, treated, etched, stained glass, or any otherwise flawed or defective glass. 2. Do not apply the film to motor vehicle windows. 3. Handle the film carefully while installing to avoid wrinkles or creases, which can't be removed. 4. If you notice imperfections such as air bubbles or debris between the film and the glass, simply peel the affected area of the film away from the glass and use the tip of your utility knife or squeegee to remove any debris or bubble.