User's Manual

• Turn bottle upside down and unscrew the battery
cover from the base of the bottle.
• Once the battery cover is removed insert battery
into sensor.
• The sensor will illuminate with a startup sequence.
• Lastly, secure battery cover back on base of bottle.
DO NOT overtighten the screw when reassembling.
Overtightening may cause damage to the product.
BATTERY INSTRUCTIONS
CHECK LID &
INSERT FINGER LOOP
DOWNLOAD THE APP
• Make sure the arrow on the seal and on the inside
of the lid are facing the same direction to prevent
leakage.
• To attach the nger loop, slide it underneath the
metal pin on the back of the lid and loop it through
itself.
• Set down your bottle after every rell and drink.
Remember to sync the app near the bottle each
day so your water is tracked correctly.
• Download our free Hidrate
Spark Smart Water Bottle
App from the App Store or
on Google Play.
• Check that you have an
internet connection and
your Bluetooth is turned
on. Follow the steps in the
app to create an account,
set parameters for a
personalized hydration
goal, add your bottle to
your prole, and set your
push notications and
glow reminders.
turn right – tighten turn left – loosen
negative
–
+
positive
1
2
• Wash thoroughly before rst use.
• RINSE IMMEDIATELY AFTER EACH USE with the
lid in the open position.
• Lid and Bottom Ring are Top-Rack dishwasher
safe.
• The Sensor Stick and Body of the bottle are HAND
WASH ONLY.
• A L W AY S S T O R E B O T T L E W I T H L I D , B O T T O M R I N G
and SENSOR STICK REMOVED to allow parts to
dry completely.
CLEANING INSTRUCTIONS