User's Manual

DISASSEMBLING &
ASSEMBLING SENSOR PUCK
• To disassemble puck from body, turn bottle upside
down and unscrew puck counterclockwise from the
body until puck pulls free.
• To assemble puck to the body, turn bottle upside
down and screw in the puck clockwise to the body
until puck snaps into place. Please make sure puck
is fully assembled and secured to the body to ensure
accurate sip readings.
Upon reassembly, we recommend recalibrating
your sensor within the app.
• To charge, turn bottle upside down and remove puck.
• Place puck on at surface and attach the magnetic
end of the HidrateSpark charging cable to the puck.
• While charging your puck will illuminate and FLASH
GREEN.
• Once fully charged your puck will remain SOLID
GREEN.
RECHARGEABLE BATTERY
INSTRUCTIONS
• Before washing, ALWAYS remove sensor puck.
Sensor puck must only be cleaned by using a damp
cloth. NEVER submerge or dishwash sensor puck.
• Wash lid and stainless steel body thoroughly before
rst use.
• RINSE LID & STAINLESS STEEL BODY AFTER EACH
USE with the lid in the open position.
• Lid is Top-Rack Dishwasher Safe.
• The Body is HAND WASH ONLY. To clean the sensor
puck only use a damp cloth. Never submerge or
dishwash the sensor puck.
• ALWAYS STORE BOTTLE WITH THE LID & SENSOR
PUCK REMOVED to allow parts to dry completely.
Upon reassembly, we recommend recalibrating
your sensor within the app.
CLEANING INSTRUCTIONSDOWNLOAD THE APP
• Download our free HidrateSpark Smart Water Bottle
App from the App Store or on Google Play.
• Check that you have an internet connection and your
Bluetooth is turned on. Follow the steps in the app to
create an account, set parameters for a personalized
hydration goal, add your bottle to your prole, and set
your push notications and glow reminders.
• Set down your bottle after every rell and drink.
Remember to sync the app near the bottle each day
so your water is tracked correctly.