Installation Manual

Full show of the Realistic connection photo:
After completing the steps of the test, the car stereo is
ready to be installed in your car.
Installation：
Note:
1.When using the rear view reversing function, the system will automatically disconnect
the link with the mobile phone, such as calls & music in Bluetooth mode, phone mirror
link, which is normal. 2.If your car does not intend to use the rear-view reversing
function, please keep disconnecting the ④ part to avoid disturbing the normal use of
the car stereo.
Connect together
Connect together and connected
to the positive pole of the battery
red
red
black
Connect together and connected
to the negative pole of the battery
①
④
⑤
⑥
②
-
-
+
+
Black
Red
Red
WIRE CONNECTION
①
②
④
④
⑤
⑤
⑥
⑥
③
Black wire connect to the GND
(Ground wire B-) of the car power.
Red wire connect to the
ACC(lgnition Switch)
Yellow wire connect to
the positive of car power
combine the pink wire of the car stereo with the top red wire of the rear camera.
Combine the two red wire together and connect it to the positive pole of the reversing headlight.
connect it to the negative pole of the reversing headlight.
(
(
6 7