Installation Guide

Quick Start
Installation Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
www.maxxsonics.com
HF HAW QSG 01 - rev1
A Low pass lter will allow only
the bass frequencies to reach the
woofer making for a more natural
transition to the higher frequency
drivers. Check your amplier’s
manual for details.
We recommend using an
electronic subsonic lter. This will
help to protect the woofer from
extreme low frequency distortion.
Many ampliers are equipped
with this type lter. Check your
amplier’s manual for details.
This subwoofer is equipped with
push and insert type terminals.
Strip back 1/2” wire insulation.
Push down on the terminal, then
insert the wire and release.
Depending on the number of woofers you intend to use,
you can congure the wiring to provide the best impedance
load for your system. Below are some examples. Consult
your amplier’s manual for recommendations.
Low Pass (LPF)
Subsonic
4Ohm DVC Congurations
Connections
Crossovers
Wiring
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
35 250Hz
LPF
15 35Hz
SUBSONIC
35 250Hz
LPF
15 35Hz
SUBSONIC
10Hz 100Hz 1000Hz
10Hz 100Hz 1000Hz
10Hz 100Hz 1000Hz
10Hz 100Hz 1000Hz
HAW10D4 HAW12D4 HAW15D4
Depending on the number of woofers you intend to use,
you can congure the wiring to provide the best impedance
load for your system. Below are some examples. Consult
your amplier’s manual for recommendations.
2Ohm DVC Congurations
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
4 4
8
2 2
4
4 4
2
4
4 4
4 4
2.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
2 2
4
2 2
4
2 2
1
4
4 4
4 4
1.4
2 2
2 2
2 2
2 2
1
2
2
2
2
2
2
Visit Hifonics.com