POWER FROM THE GODS XXCAP1000D · XXCAP200D
Steuerleitung/Remote von Radio Masse Sicherung Masse + XXCAP1000D/XXCAP2000D Anschluss-Diagramm REMOTE + an -M as Ve se rs A n tä rk sch er lu ss - +12Volt Anschluss an Verstärker Batterie -
Steuerleitung/Remote von Radio Masse Widerstand Masse Sicherungshalter XXCAP1000D/XXCAP2000D Ladeprozess des Pufferkondensators REMOTE + an -M as Ve se rs A n tä rk sch er lu ss - +12Volt Anschluss an Verstärker + Batterie - Ladeprozess des Pufferkondensators: 1. Entfernen Sie zuerst die Sicherung des Sicherungshalters. 2. Installieren Sie alle Kabel wie nebenstehend abgebildet. 3. Schalten Sie den Radio ein, um die Steuerelektronik des Pufferkondensators zu aktivieren. 4.
XXCAP1000D/XXCAP2000D Entladung des Pufferkondensators Widerstand Entladung des Pufferkondensators: 1. Entfernen Sie zuerst die Sicherung des Sicherungshalters. 2. Entfernen Sie alle Anschlusskabel des Elkos. 3. Um den Pufferkondensator zu entladen, platzieren Sie den beiliegenden Widerstand zwischen dem +/- Kontakten des Kondensators. REMOTE - + 4. Sobald der Pufferkondensator vollständig entladen wurde, können Sie mit dem Ausbau des Kondensators beginnen.