User Manual

ManualsBrandsHigh Country Tek ManualsSensorsDVC741

DVC741 Product Manual

High Country Tek, Inc.

208 Gold Flat Court

Nevada City, CA, 95959.

Tel:- (1) 530 265 3236

www.hctcontrols.com 021-00195_Rev_A-DVC741_User_Guide

1/6

Document Number: 021-00195

Document Revision: A

Document Issue Date: 4/28/2011

Document Creator: J. Clark

Document Creation Date: 4/21/2011

Instruction, Installation and Operation Guide for:

DVC741, 12 High-Side Digital Output Module

Summary of content (6 pages)

PAGE 1
DVC741 Product Manual Instruction, Installation and Operation Guide for: DVC741, 12 High-Side Digital Output Module Document Number: 021-00195 Document Revision: A Document Issue Date: 4/28/2011 Document Creator: J. Clark Document Creation Date: 4/21/2011 High Country Tek, Inc. 208 Gold Flat Court Nevada City, CA, 95959. Tel:- (1) 530 265 3236 www.hctcontrols.
PAGE 2
DVC741 Product Manual DESCRIPTION The DVC741 expansion module is a 12 High-Side (Sourcing) digital (ON/OFF) output unit designed to work in conjunction with the DVC710 master controller. The outputs can be configured to drive LED's or valve type inductive loads up to 3 amps each. The outputs are short circuit protected and have built in open circuit detection that can be used for system diagnostics.
PAGE 3
DVC741 Product Manual • • Rugged power supply operates over the full range 8.0Vdc to 32Vdc with reverse polarity protection and transient protection up to 1.5K Watts Peak Pulse Power Dissipation. Compact & rugged packaging. OUTPUT OPERATION A. B. C. D. E. All outputs are sourcing. 1. System +Power will be applied to the output when the output is activated. Maximum Output Load = 3amps per channel.
PAGE 4
DVC741 Product Manual b. Monitoring the status of the DVC741. POWER SUPPLY A. The DVC741 Power Input has the following features: 1. Range: +8.0Vdc to +32Vdc 2. Reverse polarity protection and transient protection up to 1.5K Watts Peak Pulse Power Dissipation 3. Power is supplied to the module through P8 (30 Pin Connector). 4. +POWER IN 1 - This input supplies power to the DVC741 controller and its outputs 1 through 4. 5. +POWER IN 2 - This input supplies power to outputs 5, 6, 7, and 8. 6.
PAGE 5
DVC741 Product Manual PACKAGING A. B. Physical Size : 6.2” L x 4.75” W x 1.65” H encapsulated module. Each module has two mounting holes 4.0” apart. Each mounting hole has an I.D. of 0.325”. Weight: 1 lb. 6 oz. C. CONNECTORS A. The main connector on the DVC741 is a Cinch 1.5 mm SHS series (or compatible) sealed electronic header designed for severe under-hood environments. IP69K Then CAN Bus connector on the DVC741 is a standard 5-pin M12 type CAN Bus (DeviceNet compliant) connector. B.
PAGE 6
DVC741 Product Manual  Mining & Exploration  Agriculture  Cranes & lifts  Refuse & Recycling  Construction  Off-Road vehicles  Forestry, Wood & Pulp  Reclamation & Salvage  Oil Field & Sands  Demolition Equipment  Cooling Solutions  Military Apparatus  Specialty Use  Remote Control  Power Generation  Emission Controls  Integrated Drivers  Valve & Pump Controls HCT Product Sales and Support: For a full list of authorized distributors worldwide, please visit: www.hctcontrols.