User guide

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 136
10 Hardware Installation
Listed below are the hardware connection diagrams for the various DVC products. Additional information can
be found on the website, http://www.highcountrytek.com/web/index.htm
.
10.1 DVC5 Hardware Connections
DVC5 30 Pin Metri-Pak connector
Pin Function Pin Function Pin Function
A1 NC D2 ANA PULSE 2 G3 SIG COM
A2 NC D3 SIG COM H1 DIG 3
A3 NC E1 REF OUT H2 DIG 4
B1 RXD E2 ANA 1 H3 SIG COM
B2 TXD E3 SIG COM J1 GND
B3 RTS F1 REF OUT J2 GND
C1 REF OUT F2 ANA 2 J3 GND
C2 ANA PULSE 1 F3 SIG COM K1 (+) POWER IN
C3 SIG COM G1 DIG 1 K2 (+) POWER IN
D1 REF OUT G2 DIG 2 K3 (+) POWER IN
DVC5 18 Pin Metri-Pak connector
Pin Function Pin Function
A1 HS1 D1 HS4
A2 PWM 1 D2 PWM2"EDC"
A3 PWM 1 D3 PWM2"EDC"
B1 HS2 E1 HS5
B2 PWM1 "EDC" E2 HS6
B3 PWM1 "EDC" E3 NC
C1 HS3 F1 NC
C2 PWM 2 F2 NC
C3 PWM 2 F3 NC
DVC5 5 Pin J1939 connecter
Pin Function
1 DRAIN
2 **V+ (NC)
3 **V+ (NC)
4 CAN H
5 CAN L