User guide

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 138
A3 PWM OUT 1 D3 PWM OUT 2
B1 HS OUT 1 E1 PWR COM
B2 HS OUT 2 E2 PWM OUT 3
B3 PWM OUT 1 E3 PWM OUT 3
C1 HS OUT 3 F1 PWR COM
C2 HS OUT 4 F2 PWR COM
C3 PWM OUT 2 F3 PWR COM
DVC10
5 Pin J1939 connecter (P4)
Pin Function
1 DRAIN
2 **V+ (NC)
3 **V+ (NC)
4 CAN H
5 CAN L
** Power and GND are not supplied
to the CAN Bus by the DVC5
10.4 DVC21 Hardware Connections
DVC21
30 Pin Metri-Pak connector (P5)
Pin Function Pin Function Pin Function
A1 PWR COM D2 DIG IN 6 (SINK) G3 DIG IN 16 (SINK)
A2 PWR COM D3 DIG IN 7 (SINK) H1 DIG IN 17 (SINK)
A3 PWR COM E1 DIG IN 8 (SINK) H2 DIG IN 18 (SINK)
B1 PWR COM E2 DIG IN 9 (SINK) H3 DIG IN 19 (SINK)
B2 (+) POWER IN E3 DIG IN 10 (SINK) J1 DIG IN 20 (SINK)
B3 DIG IN 1 (SINK) F1 DIG IN 11 (SINK) J2
DIG IN 21
(SOURCE)
C1 DIG IN 2 (SINK) F2 DIG IN 12 (SINK) J3
DIG IN 22
(SOURCE)
C2 DIG IN 3 (SINK) F3 DIG IN 13 (SINK) K1
DIG IN 23
(SOURCE)
C3 DIG IN 4 (SINK) G1 DIG IN 14 (SINK) K2
DIG IN 24
(SOURCE)
D1 DIG IN 5 (SINK) G2 DIG IN 15 (SINK) K3
DIG IN 25
(SOURCE)