User guide

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 94
6.8 DVC65
The DVC65 layout screen is similar to that of the DVC61 except it is
limited to 2 rows of 24 characters each. New DVC65 screens can be
defined by first clicking the right mouse button in the window and
selecting "Add Screen".
DVC65 Screens
A DVC65 Setup screen has a field to change the Name, display up
to 4 Variables, and a string of text. In the upper portion
(2x24 Test Display) of the setup screen, there is a preview of
the DVC65 display.
Name:
The name used in the bubble logic to access this screen and
its properties.
16 Alpha/Numeric characters only with no spaces
V1, V2, V3 & V4
Type
Refer to Section 8.2 for an explanation of Display Types.
X & Y
These are the X and Y Coordinates for the Displayed
Variables.
The Upper left corner is X = 1 and Y = 1
Test Value
This is the value displayed on the test screen to allow the user to preview the finished screen while in the
programming tool.
DVC65 Program Variables
Name.Status Get the state of the flag.
Range: 0 = Module is Online
2 = Module is Offline
Name.Screen Set the screen name
Range: Every defined Screen
Name.V1 Set the value for the Var 1
Range: 0 to 65535
Name.V2 Set the value for the Var 2
Range: 0 to 65535