Manual

3.17 LED Indicators
The DVC710 has four Red/Green LEDs, positioned on top of the module. They are labeled, Module Status,
CAN Status, % Current and Error Status.
Operation
When a BIOS or application is being downloaded to the controller all LED’s will be off. The Following is a list of
the individual LED behaviors:
Module Status
LED STATE MEANING
Off There is no power applied to the module.
On GREEN The module is operating in a normal condition.
Flashing GREEN Device is in standby state. May need servicing.
On RED Module has an unrecoverable fault.
On YELLOW System Disabled active
Flashing RED Low Supply Voltage.
DVC710 LED Layout
P/N: 021-00163, Rev. A.0 - for V5.2 Tools Page | 39