Manual

5.4 Process PI Closed Loop Control Example
Process PI is a feature of the DVC710 that makes it easy to control a
valve’s current as a function of two sensors inputs. The first sensor
represents the Set-point or desired system response and the second
input is called the Feedback input and represents the systems current
response (position, speed etc.). When selected in the output setup
screen, the following sample code will enable the output when the Set-
point is above zero and cause the DVC710 to automatically drive the
output to cause the Feedback to equal the Set-point:
First set up the Inputs and Output as Shown;
P/N: 021-00163, Rev. A.0 - for V5.2 Tools Page | 63