Manual

023-00354-Rev1.6 evc/epc User Manual 11

evc/epc Controller

With SAE J1939 Interface

evc/epc GUI Overview

File

All changes made through the GUI are temporary until saved permanently.

Permanently save settings to unit: Save the settings to the units EEPROM (permanent memory).

Permanently save settings to unit & file (.dat): Permanently save the settings to the units EEPROM and to a

data file that may be uploaded into any evc/epc controllers later.

Settings will be lost if not permanently saved before power cycle.

To reset the unit with a power cycle, you must remove both the USB cable and DC power from the unit.

Restore unit to last permanent settings saved: Reload settings stored in the EEPROM. This will undo all

changes made since the last Permanent Save.

Restore unit settings from data file (.dat): Load the data file from the PC to the evc/epc.

Restore unit from v1.03 data file: Load the previous version data file from the PC to the evc/epc.