Manual
023-00354-Rev1.6                         evc/epc User Manual                          35 
Copyright © High Country Tek, Inc.  2013 
evc/epc Controller  
With SAE J1939 Interface 
Dual Output With Over Speed Protection 
It works with dual fixed displacement pumps and switches valves ON or OFF according to the measured RPM. 
  The  measured  engine  RPM  can  be  from  the 
alternator , PPU, or SAE J1939.  
  BOTH outputs are ON when below . 
  -point A RPM, 
coil A ramps down to minimum current. 
  -point B RPM, 
coil B ramps down to minimum current 
NOTE: with Ramps set to minimum times, the 
outputs will drive ON/OFF valves 










