User guide

021-MVP-SVR Rev A MVP-SVR User Manual 6

MVP-SVR Power Saver Valve Controller

Physical Description

There are two indicator LEDs: STATUS and OUTPUT. The STATUS

LED is green when the applied voltage is within the operating range.

The OUTPUT LED is yellow and the brightness will vary with the output

current.

In the case of a fault the STATUS LED will flash red with a flash code.

See Fault Status for details.

The MVP communicates with the Graphical User Interface through an

infrared interface port to RS232. The infrared adapter clips onto the

MVPC/D1 aligning with the notches in the sides. It must be powered

when configuring the settings.

User Interface

The MVP-SVR has a number of internal settings.

Users can open the Graphical User Interface to view, make changes and save the settings in a data file which can

be uploaded to any MVP controller.

The Hand Held Interface can also be used to view and make changes, but this device does not have the capability

to save the settings in a data file. The programmer, cable and adapter are self-contained which makes the HHI a

viable alternative for field work.