DL.2 Digital Light User Manual

CHAPTER 9
Graphic Functions: Opacity and Effects
86 DL.2 Digital Light User Manual
Faux LED
Visual Mode parameter DMX value = 16
This options divides the image into a grid of circles to mimic an LED wall. The color of the center
pixel in each cell defines the solid color for that circle. You can control the number and spacing
of LEDs, choose between a black and white grid and adjust color peaking.
Modifier 1: Controls the number of LEDs. The default DMX value of 0 = a 10 x 10 grid of tiles.
Increasing the DMX value increases grid divisions to a maximum of 100 x 100 tiles at a value of
255 (100%).
Note: A small number of larger tiles will also result in reduced color variation.
Modifier 2: Adjusts the LED spacing. DMX values below the midpoint of the range increase the
spacing between tiles on a black background from O to a maximum space between tiles at a
DMX value of 127. Values above the midpoint increase the spacing between tiles on a white
background to a maximum space between tiles at a DMX value of 255 (100%).
Original Content
Visual Mode Parameter DMX value = 16
Modifier 1 = 4, Modifier 2 = 76
V
isual Mode Parameter DMX value = 16
Modifier 1 = 204, Modifier 2 = 16