DL.2 Digital Light User Manual

CHAPTER 11
Global Functions
114 DL.2 Digital Light User Manual
Masking Control
Mask Shape Select and Strobing
The Mask Select parameter lets
you choose a mask to frame or
overlay
DMX
value
Strobe
DMX
Value
Mask
Shapes
0128
Round “iris” mask closing from outside in
1129 Round iris closing from inside out
2130 Rectangle closing from outside in
3131 Rectangle closing from inside out
4132 Checkerboard, variation 1
5133 Checkerboard, variation 2
6134 Radial wipe, variation 1
7135 Radial wipe, variation 2
8136 Radial wipe, variation 3
9137 Radial wipe, variation 4
10 138 Triangles, variation 1
11 139 Triangles, variation 2
12 140 Rectangular wrap
13 141 Tiles closing in
14 142 Horizontal doors, closing
15 143 Horizontal doors closing from opposing sides
16 144 Vertical doors closing from outside in
17 145 Vertical wipe closing from inside out
18 146 Rectangular tiles closing from inside out 1
19 147 Rectangular tiles closing from inside out 2
20 148 Vertical panels closing from outside in 1
21 149 Vertical panels closing from outside in 2
22 150 Vertical diamonds 1
23 151 Vertical diamonds 2
24 152 Horizontal diamonds 1
25 153 Horizontal diamonds 2
26 154 Pinwheel
27 155 Oval Iris closing from outside in
28 156 Oval Iris closing from inside out
29 157 Oscillating iris closing from outside in
30 158 Animated dynamic Iris
a composite image. You
can choose to apply a mask to an
image when you don't want an
entire image to be seen or you
want to transition from an image to
black or a solid color without fading
intensity.
Mask Shapes
The graphics engine currently
provides 30 mask shapes including
circular, rectangular, and oval
masks that close from inside out or
outside in. Checker Board, Radial
Wipes, and Multi-panel options are
also included with variations.
Default DMX Value = 0 Round
“iris” mask closing from outside in.
DMX values 0-127 (0-50%) are
reserved for static mask shapes.
Values of 128-255 (51-100%) are
reserved for strobing Mask shapes.
Values not yet implemented default
to 128.
Strobing Mask Shapes
A strobing version of each simple
mask shape is defined in the 128-
255 (51-100%) DMX value range.
When a strobing mask is selected,
the strobe rate is controlled by the
Mask Edge Fade parameter from
the slowest = 0 to the fastest =
255 (100%).
Note: A Global Effect Mode parameter option lets you define a Mask color, (see Global Effect
Mode 1 and Effect Mode 2 on page 108, and Mask Color on page 147).