DL.2 Digital Light User Manual

CHAPTER 11
Global Functions
DL.2 Digital Light User Manual 121
Viewpoint Position X
The Viewpoint Position X parameter determines the x component of the viewpoint position to
the target you have specified in the Viewpoint Mode parameter. The horizontal angle is the angle
around the vertical (y) axis. Heading is another name for this angle.
Default DMX Value: 32768 = center
DMX values above center of the range move counterclockwise to the maximum horizontal angle
at a value of 65535 (100%). DMX values below the center move clockwise to the minimum
horizontal angle at a value of 0.
Viewpoint Position Y
The Viewpoint Position Y parameter sets the vertical angle above/below the horizontal plane.
Pitch is another name for this component of the viewpoint position.
Default DMX Value: 32768 = center
DMX values above the center of the range move counterclockwise to the maximum vertical
angle at a value of 65535 (100%). DMX values below the center move clockwise to the
minimum vertical angle at a value of 0.
Viewpoint Position Z (Zoom)
The Viewpoint Position Z (Zoom) parameter is the distance from the view target. Zooming
toward the target, you can move through it and view it from the back side creating an mirror
image view of the composite object.
Default DMX Value: 30260 = center (This default value is slightly less than midway through
the range to maintain some depth to the view of a composite image.)
DMX values above center move toward the maximum distance from origin in back of view target
(a DMX value of 65535). DMX values below center move toward the maximum distance from
origin in front of view target at a value of zero.