DL.2 Digital Light User Manual

CHAPTER 13
Effect Mode Options Descriptions
160 DL.2 Digital Light User Manual
Framing
Object Effect Global Effect
Effect Mode parameter DMX value = 133
This option contains three modes that modify the appearance or the operation of the Global
Image Edge Fade parameters to frame the global composite image. Modifier 2 and Modifier 3
adjustments vary depending which of the framing modes is selected with Modifier 1.
NOTE: If the Global Image Edge Fade DMX values are set to Zero, the
Framing output will be unseen in modes 0 and 1.
The images below show examples of the first two framing modes. In the image on the left
Modifier 1 selects the internal profile framing option, with Modifier 2 selecting the frame pattern.
In the example on the right, Modifier 1 selects the Graphic Object texture framing option, with
Modifier 2 selecting the frame pattern. A Modifier 3 DMX value = 10 designates the Frame
texture as Graphic Object 2’s media file content minus any applied effects.
NOTE: Global Image Edge Fade DMX values = 100.
Effect Mode parameter = 133
Modifier 1 DMX = 0, Modifier 2 DMX = 15
Modifier 3 Not Used
Effect Mode parameter = 133
Modifier 1 DMX = 1, Modifier 2 DMX = 251
Modifier 3 DMX = 10
Framing Shutter Emulation
When Modifier 1 is set to a DMX value = 2,
Modifier parameters 2 and 3 are not used.
Instead, the four Global Image Edge Fade
parameters control image to emulate framing
shutters. In the example to the right, each
Image Edge Fade parameter has been set to a
DMX value = 100.
NOTE: When emulating framing shutters, the
image being framed does not change.
This differs from Keystone Correction
that modifies the image shape.