User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 26 -
 connection, another PC1 (or user device) connect to HF-LPT200 module with serial port.
Figure 16. AP Interface Debug Connection
3.2.3. Default Parameter Setting
 Default SSID: HF-LPB100;
 Deault security mode: open,none;
 User UART parameter setting:115200,8,1,None;
 Default network parameter setting:TCP,Server,8899,10.10.100.254;
 Module IP address: dhcp,0.0.0.0,0.0.0.0,0.0.0.0;
3.2.4. Module Debug
PC1 open “CommTools” program, setting the same serial port parameters with HF-LPT200 module
and open serial port connection.
Figure 17. “CommTools” Serial Debug Tools
PC2 open “TCPUDPDbg” program, and create a new connection. If HF-LPT200 configured as Server
mode, “TCPUDPDbg” Tools shall create “Client “mode connection. Or otherwise, create a “Server”
mode connection.
Figure 18. “TCPUDPDbg” Tools Create Connection