User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 33 -
Instruction
Description
WADHCP
Set/Query AP DHCP Server status
WADMN
Set/Query AP webpage domain name
WALK
Query MAC address of STA device connecting to module AP
WALKIND
Enable/Disable indication of connection status.
Webpage Management Instruction Set
PLANG
Set/Query Webpage Language Option
WEBU
Set/Query Webpage User name and Code
Remote Upgrade Instruction Set
UPURL
Set/Query remote upgrade URL address
UPFILE
Set/Query remote upgrade configure file name
LOGSW
Open/Close remote upgrade log
LOGPORT
Set/Query UDP port of remote upgrade log
UPST
Start remote Application upgrade
Power Management Instruction Set
MSLP
Set/Query deep sleep/standby mode parameters
Network Time Set
NTPRF
Set/Query time calibration interval
NTPEN
Enable/Disable time calibration function
NTPTM
Query time
Others Instruction Set
WRMID
Set module ID
RLDEN
Set/Query GPIO45 status
ASWD
Set/Query WiFi configuration code
MDCH
Set Wi-Fi Auto Switch Function
TXPWR
Set/Query Wi-Fi Transmit Power
SMTLK
Start SmartLink function
WPS
Start WPS function
WPSTNEN
Enable/Disable GPIO 15 WPS function
LPTIO
nRead/nLink/WPS function mapping
WIFI Config Tools don’t support “CFGRD” command yet。
4.2.2.1. AT+E
 Function: Open/Close show back function;
 Format:
 Set Operation
AT+E=<status><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 status: Echo status
 on: Open echo
 off: Close echo
When HF-LPB100 module firstly switch from transparent transmission to configuration mode, show
back status is open, input “AT+E” to close show back function, input“AT+E” again to open show back
function.
4.2.2.2. AT+WMODE
 Function: Set/Query Wi-Fi work mode. Setting is valid after reset;