User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 34 -
 Format:
 Query Operation
AT+WMODE<CR>
+ok=<mode><CR><LF><CR><LF>
 Set Operation
AT+WMODE=<mode><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 mode:Wi-Fi work mode
 AP
 STA
 APSTA
4.2.2.3. AT+ENTM
 Function: Set module into transparent transmition mode;
 Format:
AT+ENTM<CR>
+ok<CR><LF><CR><LF>
When operate this command, module switch from configuration mode to transparent transmission
mode.
4.2.2.4. AT+TMODE
 Function: Set/Query module data transfer mode. Setting is valid after reset.
 Format:
 Query Operation
AT+TMODE<CR>
+ok=<tmode><CR><LF><CR><LF>
 Set Operation
AT+TMODE=<tmode><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 tmode: data transfer mode, include:
 throughput: throughput mode
 cmd: command mode
 pwm: PWM/GPIO mode
4.2.2.5. AT+MID
 Function: Query module ID information;
 Format:
 Query Operation
AT+MID<CR>
+ok=<module_id><CR><LF><CR><LF>
 Parameters:
 module_id: Module ID information;