User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 45 -
 Format:
 Query Operation
AT+WSLK<CR>
+ok=<ret><CR><LF><CR><LF>
 Parameters:
 ret
 ”Disconnected”, if no WiFi connection;
 ”AP’ SSID（AP’s MAC” ）, if WiFi connection available;
4.2.2.41. AT+WSLQ
 Function: Query STA WiFi signal strength;
 Format:
 Query Operation
AT+WSLQ<CR>
+ok=<ret><CR><LF><CR><LF>
 Parameters:
 ret
 ”Disconnected”, if no WiFi connection;
 ”AP’s WiFi signal strength” , if WiFi connection available;
4.2.2.42. AT+WSCAN
 Function: Scan AP;
 Format:
AT+WSCAN<CR>
+ok=<ap_site><CR><LF><CR><LF>
 Parameters:
 ap_site: AP searched;
4.2.2.43. AT+WSDNS
 Function: Set/Query STA static DNS server address;
 Format:
 Query Operation
AT+WSDNS<CR>
+ok=<address><CR><LF><CR><LF>
 Set Operation
AT+WSDNS =<address><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 address: STA’s DNS server address; Effective right away.
4.2.2.44. AT+LANN
 Function: Set/Query AP’s network parameters. Setting is valid after reset.
 Format:
 Query Operation
AT+LANN<CR>