User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 47 -
4.2.2.47. AT+WAMAC
 Function: Query AP MAC address parameters;
 Format:
 Query Operation
AT+WAMAC<CR>
+ok=<mac_address><CR><LF><CR><LF>
 Parameters:
 mac_address:AP’s MAC address;
Note: Module AP mode’s MAC address is related to STA mode’s MAC address. If user need
changeto others, please contact with high-flying technical people.
4.2.2.48. AT+WADHCP
 Function: Set/Query AP DHCP server status; Setting is valid after reset.
 Format:
 Query Operation
AT+WADHCP<CR>
+ok=<status><CR><LF><CR><LF>
 Set Operation
AT+WADHCP=<status><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 status:AP’s DHCP server function status:
 on:DHCP Server Open;
 off:DHCP Server Close:
4.2.2.49. AT+WADMN
 Function: Set/Query AP webpage domain name;
 Format:
 Query Operation
AT+WADMN<CR>
+ok=<domain_name><CR><LF><CR><LF>
 Set Operation
AT+WADMN=<domain_name><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 Domain_name: Webpage domain name (within 20 characters, can’t all numbers).
4.2.2.50. AT+WALK
 Function: Query MAC address of STA device connecting to module AP
 Format:
 Query Operation
AT+WALK<CR>
+ok=<status> <CR><LF><CR><LF>
 Parameters: