User Manual

HF-Z100 ZigBee Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -6-
Pin Net Name Describtion
9GPIO17 IICCLK
10 GPIO18 PWM output-3 (Timerl)
11~13 GND Ground
14 GPIO21 UART2_TXD
15 GPIO22 UART2_RXD
16 GPIO23 PWM output-4 (Timerl)
17 GND Ground
18 VBAT Main Power (2.0~3.6V)
19 GND Ground
20 GPIO29 Reserve
21 GPIO28 Enable
22 GND Ground
23 RESET_N The reset signal
24 GPIO4 ADCx3 or ADCx1
And Wakeup INTx2
25 GPIO5
26 GPIO6
27 GND Ground
2.2. Electrical Characteristics
Table 3. Operation Parameters
Parameter Condition Min. Typ. Max. Unit
Operating Supply voltage 2.0 3.3 3.6 V
RX Current Active CPU 32MHz 21 mA
TX Current Active CPU 32MHz, +9dBm 34 mA
Deep Sleep Current 10 uA
Table 4. RF Parameters
Parameter Ratings Unit
Operating Frequency
2.4~2.4835
GHz
IF Frequency 4 MHz
Quantity of Channel 16
Number of Channeels 11~26
Max TX Power 9 dBm
RX Seneitivity ~104 dBM
Data Rate 250 KBS
2.3. Mechanical Size
HF-Z100 modules detailed mechanical data is referred to as following Figure(Unit is Mil).
The pad size:25mil X 45mil, pin pitch is 40mil.