User Manual

Q612.001

2001- 2003 Arctic Cat

300 2X4

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

K&N Filter # AC-3098

1 Main Jet DJ122

1 Main Jet DJ124

1 Main Jet DJ126

1 Main Jet DJ128

1 Main Jet DJ130

1 Main Jet DJ132

1 Main Jet DJ134

1 Main Jet DJ136

1 Main Jet DJ138

1 Fuel Needle DNO105

2 Adjusting Washers DW0001

1 E-clips DE0001

Parts List

PAGE 1
Q612.001 2001- 2003 Arctic Cat 300 2X4 Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q612.001 STAGE ONE INSTRUCTIONS 1.Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needle on groove #4 for applications below 5000 feet, groove #3 for above 5000 feet, using all stock spacers. Install the Dynojet washers above the E-clip (Fig.A). 3. Remove stock main jet and replace with Moose main provided. Use the DJ132 below 3000 feet, DJ128 from 3000 to 6000 feet and DJ124 above 6000 feet.