User guide

1999-2000 ARCTIC CAT

Q603.001

PARTS LIST

1 Main Jet DJ122

1 Main Jet DJ126

1 Main Jet DJ130

1 Main Jet DJ134

1 Main Jet DJ138

1 Fuel Needle DNO480

1 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

AC 300 4X4

For mildly tuned machines using the stock

airbox with stock or aftermarket filter. May also

be used with a good aftermarket exhaust

system. K&N Filter # AC-3098.

PAGE 1
Q603.001 1999-2000 ARCTIC CAT AC 300 4X4 STAGE 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter # AC-3098.
PAGE 2
Q603.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from carbs. Remove stock needles & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needle on groove# 3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided. Use the DJ130 below 3000 feet, DJ 126 from 3000 to 6000 feet and DJ122 above 6000Feet.