User guide

1998-99 ARCTIC CAT 454

Q606.001

PARTS LIST

1 Main Jet DJ130

1 Main Jet DJ132

1 Main Jet DJ134

1 Main Jet DJ136

1 Main Jet DJ138

1 Main Jet DJ140

1 Main Jet DJ142

1 Main Jet DJ144

1 Fuel Needle DNO307

1 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

2x4 & 4x4

For mildly tuned machines using the stock

airbox with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter#N/A.

PAGE 1
Q606.001 1998-99 ARCTIC CAT 454 2x4 & 4x4 STAGE 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter#N/A.
PAGE 2
Q606.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from carbs. Remove stock needles & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needle on groove# 4 for applications below 5000 feet, groove #3 for above 5000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided. Use the DJ138 below 3000 feet, DJ134 from 3000 to 6000 feet and DJ130 above 6000Feet.