Manual

Q626.001

2004-2006 Arctic Cat

AC650 V2

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

2 Main Jets DJ110

2 Main Jets DJ114

2 Main Jets DJ118

2 Main Jets DJ122

2 Main Jets DJ126

2 Main Jets DJ130

2 Fuel Needles DNO310

2 Slide Springs DSP031

4 Adjusting Washers DW0001

2 E-Clips DE0001

PAGE 1
Q626.001 2004-2006 Arctic Cat AC650 V2 Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q626.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slides from carbs. Remove stock needles & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needles on groove #3 for applications below 5000 feet, groove #2 for above 5000 feet. Install the Dynojet washers above the E-clip, 2 per needle (Fig.A). 3. Install the Dynojet slide springs (DSP031) in place of the stock slide springs. This is Groove # 1 4. Remove stock main jets and replace with Dynojet main jets provided.