User guide

Q705.001

2002-2005 Bombardier

650 Quest

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ140

1 Main Jet DJ142

1 Main Jet DJ144

1 Main Jet DJ146

1 Main Jet DJ148

1 Main Jet DJ150

1 Main Jet DJ155

1 Fuel Needle DNO709

1 Slide Spring DSP027

1 Needle Spring DSP77

1 Adjusting Washer DW0001

1 E-Clip DE0001

PAGE 1
Q705.001 2002-2005 Bombardier 650 Quest Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q705.001 STAGE ONE INSTRUCTIONS 1.Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needle on groove #4 for applications below 5000 feet, groove #3 for above 5000 feet, using all stock spacers (Fig.A). Install the Dynojet slide spring (DSP027) in place of the stock slide spring. NOTE: The DSP77 spring does not have to be used, it is supplied in case the stock spring is misplaced.