Owner's manual

Q710.001

2004-2008 Bombardier /

Can-Am

Outlander Max 400 H.O.

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

K&N Filter # N/A

Parts List

1 Main Jet DJ124

1 Main Jet DJ128

1 Main Jet DJ132

1 Main Jet DJ136

1 Main Jet DJ140

1 Fuel Needle DNO204

1 Slide Spring DSP027

1 Needle Spring DSP77

1 Adjusting Washer DW0001

1 E-Clip DE0001

PAGE 1
Q710.001 2004-2008 Bombardier / Can-Am Outlander Max 400 H.O. Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q710.001 STAGE ONE INSTRUCTIONS 1.Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needle on groove #3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers (Fig.A). Install the Dynojet slide spring (DSP027) in place of the stock slide spring. NOTE: The DSP77 spring does not have to be used, it is supplied in case the stock spring is misplaced.