Instruction Manual

Q114.001

2004~2006 Honda

400 Rancher

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ136

1 Main Jet DJ138

1 Main Jet DJ140

1 Main Jet DJ142

1 Main Jet DJ144

1 Main Jet DJ146

1 Main Jet DJ148

1 Main Jet DJ150

1 Main Jet DJ155

1 Fuel Needle DNO188

1 Adjusting Washer DW0001

1 E-Clip DE0001

PAGE 1
Q114.001 2004~2006 Honda 400 Rancher Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q114.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from the carb. Remove stock needles & spacers, noting order of assembly (Fig. A). 2. Install Dynojet needle on groove #2 for applications below 5000 feet, groove #1 for above 5000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet and replace with Dynojet main jet provided. Use the DJ146 below 3000 feet, DJ142 from 3000 to 6000 feet and DJ138 above 6000 feet.