Owner's manual

Q212.002

2002~2011 Kawasaki

Bayou 250

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ098

1 Main Jet DJ100

1 Main Jet DJ102

1 Main Jet DJ104

1 Main Jet DJ106

1 Main Jet DJ108

1 Main Jet DJ110

1 Fuel Needle DNO180

1 Adjusting Washer DW0001

1 E-Clip DE0001

1 Plug Drill DD 5/32

1 Screw DS0001

PAGE 1
Q212.002 2002~2011 Kawasaki Bayou 250 Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q212.002 STAGE ONE INSTRUCTIONS 1. Unscrew the carb top. Disconnect throttle cable and remove the slide. Remove needle retainer (Fig.A). 2. Install Dynojet needle on groove #2 for applications below 5000 feet, groove #1 for above 5000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. This is Groove # 1 3. Remove stock main jet and replace with Dynojet main provided. Use the DJ106 below 3000 feet, DJ102 from 3000 to 6000 feet and DJ098 above 6000 feet.