Instruction Manual

Q220.001

2006-2011 Kawasaki

KVF650I Brute Force

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

2 Main Jets DJ128

2 Main Jets DJ132

2 Main Jets DJ136

2 Main Jets DJ140

2 Main Jets DJ144

2 Main Jets DJ148

2 Fuel Needles DNO227

4 Adjusting Washers DW0001

2 E-Clips DE0001

2 Slide Springs DSP005

1 Plug Drill DD 5/32

1 Screw DS0001

PAGE 1
Q220.001 2006-2011 Kawasaki KVF650I Brute Force Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q220.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slides from carbs. Remove stock needles & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needles on groove #4 for applications below 5000 feet, groove #3 for above 5000 feet. Install the Dynojet washers above the E-clip, 2 per needle (Fig.A). 3. Install the Dynojet slide springs DSP005, in place of the stock slide springs. 4.