User guide

Q217.001

2005~2007 Kawasaki

KVF750 Brute Force

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ134

1 Main Jet DJ136

1 Main Jet DJ138

1 Main Jet DJ140

1 Main Jet DJ142

1 Main Jet DJ144

1 Main Jet DJ146

1 Main Jet DJ148

1 Main Jet DJ150

1 Main Jet DJ155

1 Main Jet DJ160

1 Main Jet DJ165

2 Fuel Needles DNO227

4 Adjusting Washers DW0001

2 E-Clips DE0001

2 Slide Springs DSP005

1 Slide Drill DD 49

PAGE 1
Q217.001 2005~2007 Kawasaki KVF750 Brute Force Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q217.001 STAGE ONE INSTRUCTIONS 1.Remove vacuum slides from carbs. Remove stock needles & spacers, noting order of assembly (Fig.A). 2. With the drill provided DD 49, drill an auxiliary slide lift hole in the location shown in Fig.B. 3. Install Dynojet needles on groove #4 for applications below 5000 feet, groove #3 for above 5000 feet. Install the Dynojet washers above the E-clip, 2 per needle (Fig.A). This is Groove # 1 4. Install the Dynojet slide springs DSP005, in place of the stock slide springs.