Instruction Manual

Q202.001

PARTS LIST

1 Main Jet DJ126

1 Main Jet DJ130

1 Main Jet DJ134

1 Main Jet DJ138

1 Fuel Needle DNO106

2 Adjusting Washer DW0001

1 E-Clip DE0001

1 Slide Drill DD#37

STAGE 1

For mildly tuned machines using the stock

airbox, with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter # KA-2587.

1995-2001 Kawasaki

KEF300 Lakota

PAGE 1
Q202.001 1995-2001 Kawasaki KEF300 Lakota STAGE 1 For mildly tuned machines using the stock airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter # KA-2587.
PAGE 2
Q202.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly. 2. Using the drill provided (#37) enlarge your stock slide lift hole. 3. Install Dynojet needle on groove #3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washers above the E-clip. 4. Remove stock main jet and replace with Dynojet main provided.