User guide

Q208.001

PARTS LIST

1 Main Jet DJ120

1 Main Jet DJ124

1 Main Jet DJ128

1 Main Jet DJ132

1 Main Jet DJ136

1 Main Jet DJ140

1 Fuel Needle DNO170

2 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

For mildly tuned machines using the stock

airbox, with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter # KA-4093.

1999-2001 Kawasaki 300

Prairie

PAGE 1
Q208.001 1999-2001 Kawasaki 300 Prairie STAGE 1 For mildly tuned machines using the stock airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter # KA-4093.
PAGE 2
Q208.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly. 2. Install Dynojet needle on groove# 4 for applications below 5000 feet, groove #3 for above 5000 feet, using all stock spacers. Install the Dynojet washers above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided. If you are running the the stock exhaust use the DJ132 below 3000 feet, DJ128 from 3000 to 6000 feet and DJ124 above 6000 feet.