Manual

Q211.002

2002~2011 Kawasaki

360 Prairie

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ138

1 Main Jet DJ142

1 Main Jet DJ146

1 Main Jet DJ150

1 Main Jet DJ155

1 Main Jet DJ160

1 Fuel Needle DNO242

2 Adjusting Washers DW0001

1 E-Clip DE0001

1 Plug Drill DD 5/32

1 Screw DS0001

PAGE 1
Q211.002 2002~2011 Kawasaki 360 Prairie Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
STAGE ONE INSTRUCTIONS Q211.002 1. Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needle on groove #3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washers above the E-clip (Fig.A). 3. Remove stock main jet and replace with Dynojet main jet provided. Use the DJ150 below 3000 feet, DJ146 from 3000 to 6000 feet and DJ142 above 6000 feet.